Simply place the solar panel pigeon proofing wire or weld mesh nylon clips every 30-40cm along the solar panel frame and pull tight. Roll out the wire mesh or weld mesh and cut it into manageable lengths, then position the wire mesh or weld mesh in place, ensuring the fastening rod points upwards. Attach the fastening washer and join the next section of wire mesh or weld mesh with cable ties. STEP 2: Set the wire mesh screen in place. Make sure the fastener rod comes through the screen at an upward angle as to keep downward pressure on the screen, pushing it towards the roof. Solar panels are being installed on commercial and residential roofs across the United Kingdom at an ever-increasing rate. These arrays provide perfect harbourage for birds, and homeowners are desperate for a solution that does not involve piercing or damaging the solar panels with mechanical fixings or adhesives, hence avoiding warranty infringements. For SolarFix clips to work the solar panel must have a minimum 20mm return lip on the underside of the frame. The manufacturer recommends using 2 clips on the short edge and 3 clips on the long edge, spaced every 450mm. Always take appropriate safety precautions when working on a roof and on live electrical installations.

Both types of weldmesh can either be trimmed down with some suitable tin snips or wire rope cutters. Alternatively, excess wire mesh can be bent inwards to create a dual-layer of protection.

Problem Species

This non-penetrating kit is a fast and easy solution to prevent pest birds from gaining access to the underside of solar panels without drilling and voiding any existing manufacturer’s warranty. Our bird control pigeon proofing solar panel wire mesh or weld mesh installation clips are designed to securely attach solar panel pigeon proofing bird control wire mesh to your solar panels, providing a physical barrier that birds and other pests cannot pass through. The solar panel pigeon proofing wire or weld mesh nylon clips are made from high-quality materials and are easy to install, so you can protect your solar panels and roof in no time. The SolarFix system is designed specifically to keep all birds from getting under solar arrays, protecting the roof, wiring, and equipment from their damage. This non-penetrating system is fast and easy to install, and can be removed for service. Cut the roll into 1.6 M sections (or length of the longest side of a panel), it is much easier to work with shorter lengths. This innovative system is designed specifically to keep pigeons from getting under solar arrays, protecting the roof, wiring, and equipment from damage. This non-penetrating system is fast and easy to install.

This innovative system is designed specifically to keep all birds from getting under solar arrays, protecting the roof, wiring, and equipment from damage. Solar panels are being installed on commercial and residential roofs across the UK. These arrays provide perfect harbourage for pigeons, homeowners are desperate for a solution that does not involve piercing or damaging the solar panels with mechanical fixings as this will void the panel warranty.

Keep in Touch

STEP 3: Slide the speed washer onto the shaft of the clip assembly until snug. Make adjustments to the screen as necessary. Tighten speed washer to panel edge. Mesh Size: 25 mm X 12.5 mm (1″ X 1/2″) (Please note cheaper kits on the internet are sold with inch x inch mesh which is much weaker) For the SolarFix clip to work the solar panel must have a minimum 20mm return lip on the underside of the frame.

This Solar Panel Mesh Wire Clip is made from UV-stabilised Nylon and works to attach wire mesh to solar panels, helping to form a system designed to prevent all kinds of birds from accessing the underneath of rooftop solar arrays. As a result, you can easily protect the roof, wiring and equipment from any damage. Include a 75mm (3inch) overlap of the mesh when installing the next section, joint the mesh with stainless steel corner ties (sku- sscabletie) where the mesh overlaps and on the corner joints. Our solar panel pigeon proofing wire or weld mesh nylon clips solution is also durable and long-lasting, able to withstand harsh weather conditions and provide reliable protection for your solar panels for years to come from pigeons, birds and other pests. Don’t let pigeons, birds and other pests damage your solar panels – try our bird control solar panel pigeon proofing wire or weld mesh nylon clips today! A typical solar panel is approximately 1.6m tall and 1m wide, on a typical panel one should use 3 clips on each long edge and 2 clips on each short edge. See the diagram attached to this product listing for more details and an example of a typical installation. Our solar panel pigeon proofing wire or weld mesh nylon installation clips are the perfect solution!

Our bird control solar panel pigeon proofing wire or weld mesh nylon clips are also durable and long-lasting. These bird control solar panel pigeon proofing wire or weld mesh nylon installation clips are able to withstand harsh weather conditions and provide reliable protection for your solar panels for years to come. For this clip to work, the solar panel must have a minimum 20mm return lip on the underside of the frame.

Protect your solar panels from bird damage with our innovative Bird Control Solar Panel Clips. Designed to keep birds away from under solar arrays, these clips safeguard your roof, wiring, and equipment.

Sorry

For outer corners, cut the solar panel pigeon proofing wire or weld mesh upwards from the bottom until the bend point and cover any gaps with a corner piece. For inner corners, cut the solar panel pigeon proofing wire or weld mesh upwards and secure any overlapped sections with cable ties. Looking for a reliable and easy-to-install solution to protect your solar panels from pigeons, birds and other pests? Cut off any excess wire mesh or weld mesh screen and flush the clip assembly rod with the speed washer. the presence of wildlife and debris can cause structural damage. For instance, rodents can chew through the wiring or debris can accumulate moisture, leading to potential corrosion on the roof. The solar mesh is a heavy-duty and physical barrier that prevents a wide range of bird activity under solar panels, including roosting and nesting. The mesh size will usually prevent smaller birds than our solar spike range and can be effective for starlings and sparrows.