If you look closely at the small print on many power supplies, you’ll see they’re rated for anything from 100 to 250 volts. This means most can work worldwide with nothing more than an adapter to account for the physical plug differences — no voltage transformer needed. Am I getting this concept wrong? Or is a special cable an impossible vision because the car adapter will only work if it is getting 12V and not 5V? It is my understanding that the volts you are trying to input should be the same or less than the device you are charging. While the amps should be the same or they can be slightly higher than the device you are charging. If I knew what kind of resistor I can buy to solder in with a wire that would be about my only option. We have a wide selection of power supply units (PSUs) for use in various domestic and industrial applications. Our range includes AC-DC power supply adapters and desktop computer power supply suitable for domestic applications, as well as bench power supplies, DIN Rail and panel mount power supplies and switch mode PSU. What is a power supply?

12V 1.5A Power Adapter Supply, Plug UK 3.5mm x 1 AC to DC 12V 1.5A Power Adapter Supply, Plug UK 3.5mm x 1

Here’s the catch: just because the physical plug fits into your device does not mean that the polarity is correct. Example of a polarity indicator. (Image: Three-quarter-ten, CC BY-SA 3.0, via Wikimedia Commons) No, amps do not have to match, but the power supply or charger must be able to supply enough amps as required by the device being powered or charged. In practical terms, that means the amperage rating of a power supply or charger must match or exceed that required by the device it is connected to. Does more volts mean more amps? When replacing a charger, this is easy to determine: it’ll be listed somewhere on the old charger. In your case, the old charger supplied 19 volts, so your replacement must also be 19 volts. Unfortunately the gauge of the USB 2.0 cable is really a high number (meaning that the wires are few and small). I’m thinking I should redo my cable and use a USB 3.0 cable because I think it may be able to handle the Voltage.Power supplies are a crucial aspect of any electrical equipment, providing reliable power to machinery, computers or other technology devices. A power supply changes a source electric current, such as a mains plug, to the correct voltage, frequency and current needed to operate the equipment safely. How do power supplies work? Most power supplies provide their output on two wires: one labeled (+) or positive, and the other (-) or negative. Which wire is which is referred to as polarity. As long as the correct voltage is used, a device will draw only the amperage it needs, meaning there will not be “too many amps”. If an incorrect voltage is used — say a higher voltage than the device is rated to accept — then yes, too many amps may be drawn, and the device can be damaged. This is why it’s critical to use the correct voltage. Can I use an AC adapter with higher amps? I would just state the obvious, use the charger that has a normal temperature as long as it is not damaging the device you are charging. The fact that you’ve charged a device with .5A tells me that the device you’re trying to charge will not blowup and the requirement of that device requires at least .5A. But again, without knowing what your charging exactly it can vary with what device you are actually charging. I would recommend you either look for the fine print or google your device’s input power requirements. Power supply efficiency is known as the amount of power actually provided to the internal circuitry, divided by the amount of power drawn from the mains supply. If a PSU is 50% efficient and is required to provide 50 Watts of power, 100 Watts will be drawn from the main supply. The extra 50 W is lost as heat. A 90% efficient PSU would draw 56 W in the same circumstances. What industries can power supplies be used in?

Power Supplies, Power Supply Units (PSU) | RS - RS Components Power Supplies, Power Supply Units (PSU) | RS - RS Components

And here’s the problem: there’s no way to say what’s enough or too much. It varies from device to device. Some may tolerate a wide range of input voltages, while others are extremely sensitive to even the smallest error. I have a Nintendo 3ds that requires 4.6 Volts and 900 mA (you might as well say 1 amp). Older Nintendo DS’s required 5 Volts so I was ok cutting the charger cable and making my own USB charger out of it so I can either charge it in the wall or with a portable charger. A power supply is used to reduce mains or three phase electricity, often at 240 Vac or 440 Vac down to a voltage that is usable, such as 12 Vdc. The PSU also converts the current rating, in the form of AMPS, to a level that is safe for the device that is to be powered. What is the difference between the types of power supplies?Of course I was excited to do it. My thought was that if the Nintendo car adapter charger steps 12 volts down to 4.6 Volts at 900 mA, then this new cable should step 5 volts down to 4.6 at 900 mA. But it did not work. Particularly when it comes to popular circular power connectors, make sure the expectations match. If the device expects the center connector to be positive and the outer ring to be negative, your power supply’s connector must match. There’s no getting around this. The problem, of course, is the reverse: if your device needs 1.0 amps, but your charger is rated at only 0.5 amps, then any of several problems could result: Sidestep all those unknowns and make sure to get exactly the right voltage from the start. Amperage

12V AC Adapters | RS 12V AC Adapters | RS

As long as the voltage matches that expected by the connected device, then yes, you can use an AC adapter capable of providing higher amps. Can I use a 5V 2A charger with a 5V 1A device? Company policy is that we do not under any circumstances issue instructions to our couriers to leave deliveries unattended when no one is at the delivery location. I got to doing a little more research regarding USB ports and cables have different amperage capabilities. For example USB 3.0 does 900mA, while USB 2.0 does something like 500mA. You really need to look at the device requirements (in this case your power bank – I guess). It is always possible that you have a “lemon” if your charger heats up fast.Yes. Because a) the voltage matches, and b) the amperage provided is greater than that needed, you can use a 5v-2A charger with a 5V-1A device. Is 500ma the same as 0.5 A? When I took my multimeter and took a reading on the output of the car adapter from a 5V charger, it was reading 4.14V or 3.8V, and the Nintendo 3DS charger light would blink. Thus, as long as you replace your power supply with one capable of providing as much or more amps than the previous, you’ll be fine. In other words, there is nothing wrong with having a charger capable of providing more amps than needed. Polarity Electrically speaking, higher voltage can cause more amps to “flow”. This is one reason why getting the voltage correct on a power supply is so critical, because it can, in a sense, “push” too much electricity through a device and cause it to overheat or be damaged. Can too many amps damage a device?

12V DC 1.5A Slim Power Supply 7DC Plugs | Jaycar Electronics 12V DC 1.5A Slim Power Supply 7DC Plugs | Jaycar Electronics

It’s very important to get the right voltage. Some devices are tolerant of variations and work just fine. Others, unfortunately, are not tolerant at all. Depending on how different the supplied voltage is from what’s required, the device may simply fail, it may work “kind of”, or it may appear to work at the cost of a much shorter lifespan. The amperage rating of a charger or power supply is the maximum it can supply. A device being charged will only take as much amperage as it requires. If your device needs 0.5 amps to charge, and your charger is rated at 1.0 amps, only 0.5 amps will be used. I have a USB 3.0 cable, but if it is an exercise in futility then I’m just wasting money on a fantasy. The amperage provided by your charger must match or exceed what the device being charged requires. Amperage Provided Versus Amperage Required Power Supply or Charger Amperage Rating

Unsubscribe from this on special notification