Mapei Ultracolor Plus Coloured Grout Moon White 103

Product Information

When resistance to acids or, where extreme cleanliness or sterile conditions are required, use a suitable acid-resistant epoxy grout. Where required, add Mapei MapeGlitter or Mapei Mapecolor Metallic to Mapei Kerapoxy Easy Design once the blend has been mixed, at a variable ratio depending on the aesthetic effect desired, within the limits described above (up to 6% for MapeGlitter, 3% for Mapecolor Metallic so that the workability of the grout/mortar is not affected). Given that Mapecolor Metallic is extremely fine and volatile, it is recommended to use and mix the product indoors, in an area protected from draughts. Interior use may cause the product dispersion in the environment and its deposit on the surfaces.

Mapei Kerapoxy Easy Design is ideal for grouting ceramic tiles, glass mosaics and stone materials with grout joints measuring from 1 to 15 mm wide. It can also be used as an adhesive. If cleaning is carried out a few hours after applying the grout, it may be necessary to leave it standing for longer (at least an area protected from draughts. Interior use may cause the product dispersion in the environment and its deposit onKerapoxy Easy Design does not guarantee a perfect bond when used as a grout if the edges of tiles are wet or contaminated with cement, dust, oil, grease, etc.

Mapei Ultracolor Plus creates water repellent grout joints that have excellent colour uniformity. All colours are resistant to UV rays and atmospheric agents. The liquid residual may be removed with the same sponge, which must be replaced when it becomes too impregnatedrecommend using a low-speed electric mixer to guarantee perfect blending, and to avoid overheating of the mix which Finishing: When the mix loses its plasticity and becomes opaque, which usually takes place after 15-30 minutes, clean off the excess Ultracolor Plus with a hard, damp sponge (e.g. a MAPEI sponge), working in a diagonal direction to the joints. Rinse the sponge frequently, using two different containers of water: one to remove the excess mix from the sponge, and the other, containing clean water, to rinse the sponge. This operation may also be carried out with a machine with a sponge belt or rotating disc. When the mix is partially set, after 50-60 minutes, a damp Scotch-Brite® sponge or an abrasive felt disc may be passed over the joints to even out the surface.

UltraCare Kerapoxy Cleaner can be used both immediately after grouting and after completing laying work. faster application times and makes it easier to clean from surfaces, with less waste and easier to obtain a good finish; UltraCare Kerapoxy Cleaner (special cleaning solution for epoxy grout) may also be used for the final cleaning cycle. that the joints are filled right down to the bottom. Remove excess material by passing the edge of the same trowel where a high protection from the formation and proliferation of micro-organisms (such as fungus and mould) is required;

Pour the catalyst (component B) into the container of component A and mix well until a smooth paste is obtained. We Add Mapecolor Metallic after mixing the two components of Mapei Kerapoxy Easy Design together (A+B). Create a hole in the paste obtained and pour Mapecolor Metallic in it; cover it and manually mix to properly blend the powder pigment. Then mix with a low-speed mixer to avoid the possible product dispersion in the environment. Use the mix within 45 minutes of preparation.

the aesthetic effect desired, within the limits described above (up to 6% for MapeGlitter, 3% for Mapecolor Metallic so that Excellent workability, much better than traditional epoxy mortars thanks to its creamy consistency, which guarantees faster application times and makes it easier to clean from surfaces, with less waste and easier to obtain a good finish;Use a flexible sealant from the MAPEI range (such as Mapesil AC, Mapesil LM, Mapeflex PU 40, Mapeflex PU 45 FT or obtained and pour Mapecolor Metallic in it; cover it and manually mix to properly blend the powder pigment. Then mix