H.265 HEVC / H264 high-profile video encoder, 4Kp60/50/25/30/24, 1080p50/60/25/30/24, 1080i50/60, 720p50/60, PAL, NTSC at up to 20,000Kbps. Solo can be connected to any camera with both SDI or HDMI options allowing you live stream video in full HD, going beyond cellphone quality. Bonding

Select Disable and press the Center ( OK) button to disable the interface. The Disable button of the interface changes to Enable, indicating that the interface is currently disabled. Delivery timings are approximate and may differ due to circumstances outside of our control such as flight delays, traffic incidents, extreme weather etc. Your unit may also show some variations of these issues. The exact behavior can differ slightly based on exact modems, and by random factors like the boot sequence of connections - any combination of these behaviors may be a sign of IP Conflict. And, because you have 256 values to choose from, its pretty easy to choose values that are not likely to conflict with other WiFi, MiFis or your phone. Just avoid relatively low numbers (1 and 8 and 10, for example) and instead use some medium range values (12, 22, 32, whatever you want) and your chances that some other device in the wild has used that same number is very low. The LiveU Solo is a video encoder offering one-touch, wireless live streaming, directly from your camera or switcher to Facebook Live and delivers professional quality video streams without a large crew, lots of equipment or steep learning curve. LiveU Solo lets online broadcasters of all sizes live stream HD video content directly to any online video provider - from anywhere. FeaturesYou frequently get the Communication Error message on your unit - particularly only when using it with modems (vs on only LAN or WiFi) The Interfaces option in the Main screen indicates the number of active interfaces out of the total number of interfaces on the LiveU Solo. In the example to the left, 4/4 means that there are four active interfaces out of the four total interfaces on the unit (2 x cellular, 1 x WiFi and 1 x Ethernet network interface). Once you have your account created, you will be asked to register your device if you have not already done so.

The next screen you see is split into two (2) sections, One-Touch Streaming and Streaming Destinations. The difference between the two categories are the steps you use to configure that destination.These are just two examples, if some of the digits in your exact setup differ, it is still a conflict! Conflicts For example: Got two brand new modems that are the same make and model each? they will very likely need to be changed to not conflict.