Ruida Controller 400x400mm Working Area 50W CO2 Engraving Cutting Machine

Product Information

Laser Tube Configuration: single laser and double lasers are available for option and set in accordance with the laser-tube quantity provided by the manufacturer. PC-USB is a USB-BM interface. The controller may communicate with PC by this port. Ethernet Interface When it is indicated whether the pulse signal of motor driver is the valid rising edge or the valid falling edge, it will be subject to the pulse signal inputted from the minus end of side OC diode.

Exactly!! I typed in 1.2 INCHES for the move and the table moved down 1.2 mm and the display read 1.2. But the display is in inches. see the problem yet? after the 1.2 mm move the display should have read 1.2/25.4=0.0472 When the laser is a glass tube, this pin will be connected with the laser power PWM end and used to control the power of the laser. If you are installing a new controller into a machine, you will need to perform the configuration that is normally done for you by the factory.Overall, it is important to choose a controller that offers a good balance between functionality and ease of use, and that will help you get the most out of your laser-cutting machine.

On-board system encryption control, onboard parameter storage, and file storage capacity of up to 256M When you power up the laser, the first thing it will do is move toward the corner it thinks those switches are at to home itself. If it's moving in in the wrong direction, you'll have to hit the ESC button on the controller itself to stop it. Margin Distance: It means whether to extend a certain length outside the actual frame of the figure on the preview/cutting of frame. RDWorks is a software program used to create and control laser cutting and engraving machines. Here are some potential pros and cons of using RDWorks: Pros:Control Mode: Double-pulse or direction + single pulse are optional; in general, direction + single pulse is selected. Water protection enables: When the water protection enabled, the controller must connect the wiring, otherwise the machine will not emit laser. If disable, no need to connect the water protect wiring, controller will not test. The Ruida RDC6442S features a USB interface, which allows for easy transfer of data from a computer to the controller. It also has a dedicated DSP processor, which ensures that the laser head moves smoothly and accurately during the cutting and engraving process.

So as you can see already with just a few simple descriptions, we’ve covered most of this circuit diagram. Now just down here, there are a set of legends here which are numbered one to 15, which tells you exactly what these LEDs do. This function is to set the screen origin position, to choose different origin position, which can mirror the graphics on X/Y direction. The operation way as above mentioned. File Key Memory File Import artwork in a variety of common vector graphic and image formats(including Al.PDF, SVG, DXF, PLT, PNG, JPG, GIF, and BMP)

RDC6442G VS RDC6442S

Basically, just like you do on your spark plug for your car, in a slightly more sophisticated manner. Transmission Mode: generally choose “Belt Stepping Type”, the control algorithm will be changed a little when other types are selected.

CN1 to CN4 are all to do with sensors and switches for telling the controller what’s going on around the machine. Need more overshotting or larger acceleration (grammatical error intended) - Like the NOT ENOUGH EXTEND SPACE error, t his error occurs when the design is too close to an edge of the bed . This error message refers to Overscanning or Overshoot. When the laser is engraving, it may require extra space on the sides to get up to speed before the engraving starts, and to slow down and reverse after the engraving is finished. If the design is too close to the sides of the machine, the overshoot distance may result in crashing the machine. Increasing the acceleration or reducing the speed will both reduce the amount of overshoot space required. Depending on the design, the error may not always occur immediately. They use a direct analog naught to five volt signal to send it to the power supply via the same in-terminal. Now, the laser power supply has got an in-terminal and at that in-terminal, there is a little network which decodes that signal.The Ruida RDC6442S is a motion control system used in laser engraving and cutting machines. It is known for its high-speed and precise control of the laser head, which enables it to cut and engrave a wide range of materials, including wood, acrylic, leather, and metal. The Enable Parameters are to enable or disable the above functions. If the machine is provided with the parameters for the single-laser in the manufacturer parameters, the display entry of enabling parameters will be