If tap the footswitch twice, the loop stops. After stopping the loop, hold the footswitch down for longer than two seconds and the pedal will erase your loop. There are a couple of other pedals in the BOSS Loop Station range such as the RC-505MKII, but those pedals aren’t relevant for guitarists. They’re tabletop units designed for vocalists/DJs and don’t use footswitches. And that’s it for the primary features of the BOSS RC-1. It’s a great pedal for a person who just wants a simple looper that gets the job done. We’re not done yet though because I have a few tips for you that are worth sharing. 4 Tips for Using the BOSS RC-1 Loop Station 1) You Can Record A Loop For Up To 12 Minutes My guess is that they were going to call this the RC-50, but because they had an RC-50 in the past (now discontinued), they felt that RC-500 would be a good model number. The Automatic mode will begin recording as soon as you start playing. The Count-in mode gives you a bar of rhythm set at a tempo of your choice (using a tap tempo button) before it starts recording.

The RC-600 also increases the I/O capability by offering two stereo inputs, two mic inputs, and three stereo outputs. The RC-3 is for guitarists looking for a simple looper that has room to grow with them. Basic loopers like the RC-1 or the Ditto can begin to feel limited after a while. Buy the Boss RC-1 Loop Station now and add this easy-to-use loop pedal to your sound and enjoy some great stereo loop effects for your guitar, bass, keys or synth. Accessories: Owner’s Manual, Leaflet (“USING THE UNIT SAFELY,” “IMPORTANT NOTES,” and “Information”), Alkaline Battery (9 V, 6LR61) You have just one memory location in the RC-1, and that’s not really a separate loop storage space. It just remembers the last thing you recorded and didn’t clear. Fortunately, it does retain the memory after the pedal is switched off.There have been times in the past when I bought a lower model pedal to save some money, only to regret it later on. I’ve never bought a more expensive model and wished I had fewer features. The terms of this Section are agreed allocations of risk constituting part of the consideration for Roland’s licensing of Software to You and will apply even if there is a failure of the essential purpose of any limited remedy, and regardless of whether a party has been advised of the possibility of the liabilities. If applicable law prohibits any portion of the limits on liability stated below, the parties agree that such limitation will be automatically modified, but only to the extent required to make the limitation compliant with applicable law. You’re even able to connect a microphone directly into the pedal with an XLR cable, which allows you to use the looper for acoustic guitar, vocals, or any other instrument using a microphone.

The RC-3 adds useful features such as saving up to 99 loops and a rhythm player. These features make the RC-3 a worthwhile upgrade from the RC-1. The X2 only adds in two loop effects that most players aren’t going to use. Overall: A great choice if you want something simple. If you want more features and more memory locations, you will have to look elsewhere. Compare Prices: While the RC-1 is a great pedal, it’s bare-bones compared to the RC-3. Being able to save up to 99 recordings on your pedal will be worth the extra price for most guitarists. Unlike the other loop station pedals in this guide, the RC-10R really does focus heavily on the rhythm aspects instead of the looping aspects. BOSS RC-10R vs RC-30Assignable footswitches: what makes this interesting is that each footswitch can be controlled with tap, double-tap, or hold. This gives you three possible ways you can assign functions to every footswitch. This is a great feature that should allow you to customize your pedal to suit your own needs. The “mono to stereo”-feature suggested by Howard above does not seem to work in this case: the stereo channels are separate. The big advantage the RC-300 still has over the RC-500 is the sheer number of footswitches, controls, and external device support.

For example, let’s say you have a delay pedal and you want the timing of the delay to match your loops. If your delay pedal is MIDI compatible, you can easily sync it with the RC-300 (the RC-30 also supports MIDI). Choosing between the RC-30 and the RC-300 Live use: some pedals are easier to use in live performances than others. You probably don’t want to need to bend down to adjust your pedals in a performance. If you’ve read through each of the above pedals, you should have a good idea of which one suits you the best. There’s a big difference between each Loop Station pedal, so for most guitarists, the choice will be easy.The downside of the RC-5 is that it still only uses one footswitch. While you can connect external footswitches, that’s an extra cost that could go towards a bigger unit. If you’re looking for a basic looper that won’t take up much space on your pedalboard, then the RC-1, RC-3, or RC-5 is probably all you need. A great tip to master the art of looping is to treat the pedal as an instrument. All you need to do is press the pedal in time to what you are playing and you’re golden - if you can tap your foot in time, you can loop. MIDI control: when you get to this level of looping, you’re probably going to want MIDI. MIDI gives you an easy way to sync up multiple pedals and instruments.