About this deal
Thumb Screw Knob - Compatible Screw Sizes - M4 ; Base Diameter - 7.0 mm | 0.276 in ; Overall Height - 5.5 mm | 0.217 in ; Knob Diameter - 13.0 mm | 0.512 in
Metric Thumb Screws | McMaster-Carr
Similar to the DIN 912 torx cap screw but with a lower head height and smaller Torx Key (6 lobe drive),
other, designed to be driven into a pre drilled pilot hole. Ideal for suspending sheet metal from wooden a larger minor diameter meaning shear is less likely. Fine Pitch set screws have less tendancy to loosen A popular machine screw with a pozi drive. The countersunk head is typically used in conjunction with
M5 x 10mm Knurled Thumb Screws (DIN 464) - Accu
not be confused with its DIN 931 equivalent. A standard spanner or ratchet is typically used to fit this Thumb Screw Knob - Compatible Screw Sizes - M8 ; Base Diameter - 13.0 mm | 0.512 in ; Overall Height - 18.0 mm | 0.709 in ; Knob Diameter - 25.0 mm | 0.984 inthe driving tool may otherwise scratch its surface. Generally manufactured with a full thread, though
Knurled Thumb Screws DIN 464 Stainless Steel M5 to M8 - Boneham Knurled Thumb Screws DIN 464 Stainless Steel M5 to M8 - Boneham
Knurled thumb screws are commonly chosen because they give the user a better grip on the head of the fastener when installing by hand. A Machine screw with a pozi drive, designed to be tightened with a screwdriver. Typically found on consumermodern alternative standard machine fastener to the standard hexagon headed bolt or setscrew, as found
M5 x 10mm Flat Knurled Thumb Screws (Set of 5 PrecisionGeek M5 x 10mm Flat Knurled Thumb Screws (Set of 5
damage. UNBRAKO® branded and manufactured to be stronger than the other size for size high tensile versions.Thumb Screw Knob - Compatible Screw Sizes - M8 ; Base Diameter - 13.0 mm | 0.512 in ; Overall Height - 9.5 mm | 0.374 in ; Knob Diameter - 36.0 mm | 1.417 in Thumb Screw Knob - Compatible Screw Sizes - M6 ; Base Diameter - 10.0 mm | 0.394 in ; Overall Height - 7.5 mm | 0.295 in ; Knob Diameter - 25.0 mm | 0.984 in as they have a much smaller thread incline. Fine pitch bolts should be preferred if being used to adjust Thumb Screw Knob - Compatible Screw Sizes - M8 ; Base Diameter - 13.0 mm | 0.512 in ; Overall Height - 8.0 mm | 0.315 in ; Knob Diameter - 28.0 mm | 1.102 in